Working Principle of Pneumatic Self-Cleaning Filter: The raw material enters the filter through the inlet. During the filtration process, impurities in the water accumulate on the stainless steel filter screen, with the inner layer of impurities gradually building up. Features: High filtration precision, with a…
Read More
The self-cleaning filter has been fully tested and adjusted before leaving the factory. Users can operate it directly upon installation. If the operating parameters do not meet user requirements, they can be adjusted based on actual working conditions. Users can select either manual or automatic…
Read More
Filtration Precision: The default filtration precision is 3000 microns, with options ranging from 100 to 3000 microns. The self cleaning filter has a large filtration area and high contaminant holding capacity, customizable according to the user's actual working conditions. Simple Cleaning Method: The cleaning cycle…
Read More
Product Introduction The self-cleaning filter consists of an inlet, outlet, electric motor, differential pressure switch, control circuit, filter screen, stainless steel brush, solenoid valve, and drainage switch. Filters are indispensable equipment in modern supply pipelines, primarily used to remove small solid particles from liquids, ensuring…
Read More
The scraper-type self-cleaning filter is suitable not only for separating solids from low-viscosity liquids but also for separating solids from high-viscosity liquids. Filtration: The fluid to be filtered is forced into the internal chamber of the filter. The fluid passes through the filter element from…
Read More
Contact us
The rotary arm self-cleaning filter is an integrated filter system where multiple filter elements are installed within a single filter housing. It features a compact design and is typically used for removing solid particles from low-viscosity media. The medium to be filtered flows from the…
Read More
Working Principle: Raw water enters the self cleaning filter through the inlet and first passes through the coarse filter element, which removes larger particulate impurities. It then reaches the fine filter mesh, where smaller particles are filtered out, and clean water exits through the outlet.
Read More
The brush self-cleaning filter consists of the following main components: motor, electrical control box, control pipeline (including control valves and differential pressure transmitter), main pipe assembly, filter element assembly, 316L stainless steel brush, frame assembly, drive shaft, and inlet/outlet connection flanges. The electrical control box…
Read More
Water enters through the inlet and passes through the coarse Self Cleaning Filter screen to remove larger particles of impurities, then reaches the fine filter screen. During the filtration process, the fine filter screen gradually accumulates dirt and impurities from the water, forming a layer…
Read More
II. Technical Parameters 2. Description of Brush Filter: (1) Electrically driven, stainless steel brush cleaning, strong system pressure capacity; (2) High-precision pressure difference control design, time control, manual cleaning; (3) Stainless steel brush removal, installation, and maintenance are simple and easy to operate; (4) Motor…
Read More