Application Instructions for Self Cleaning Filter

JX Filtration February 1, 2024 Self Cleaning Filter

When water enters the self-cleaning filter cylinder from the bottom water inlet, impurities are intercepted on the inner wall of the filter cylinder. The filtered clean water flows out from the outlet. When the impurities on the inner wall of the filter cylinder accumulate, the pressure difference between the inlet and outlet of the self-cleaning filter reaches the preset value or the cleaning time is reached, or it is manually preset. The filter will start the self-cleaning process. The entire self-cleaning process consists of two steps: opening the automatic drain valve located on the self-cleaning filter and the motor driving the cleaning brush inside the filter to remove the impurities intercepted by the filter from the drain valve. During cleaning, the system continues to flow. The entire operation of the self-cleaning filter is controlled by an intelligent control box randomly equipped. Control methods include pressure difference, time, manual, and PLC control.

Application Range

Industrial Filtration Applications:

Cooling water filtration
Nozzle protection
Tertiary treatment of sewage
Municipal water reuse
Workshop water use
Pre-filtration for R.O. systems
Pickling
Paper white water filtration
Injection molding machine
Pasteurization system
Vacuum pump system
Compressed air system
Continuous casting system
Water treatment applications
HVAC water systems

Irrigation Filtration Applications:

Groundwater
Municipal water
Rivers, lakes, seawater
Orchards
Nurseries
Greenhouses
Golf courses
Parks

Product Features

Maximum filtration flow rate per unit: 1260m3/h
Filtration accuracy: 4000 microns - 20 microns
Filter options: perforated (4000-800μm), wedge-shaped (1000-50μm), woven composite (800-20μm)
Minimum operating pressure: ≥0.1MPa
Maximum operating pressure: ≤1.6MPa (customizable for special requirements)
Operating temperature: ≤95°C (customizable for special requirements)
Cleaning motor power: 0.09-0.25KW
Control voltage: AC24V
Cleaning method: brush type
Control method: pressure difference, time, manual, and human-machine interface (PLC)
Cleaning time: Adjustable from 10 to 200 seconds
Installation form: Can be installed vertically or horizontally, and multiple units in parallel can achieve larger flow rates